The UK's #1 for wedding invitations, DIY, handcrafted, and printed stationery

Starfish Layered Square Assembly


Step 1:
Take your printed insert with your invitation wording and the largest piece of white card that measures 145mm x 145mm.  Add the double sided tape, all around the edges of the printed insert, then secure this to the largest piece of card. Tip: Once you have the card lined up at the top left and right, when you press down it will be correct at the bottom.



Step 2
: Cut the raffia to three lengths each measuring 50cm.



Step 3:
Turn the smaller white piece of card (with your names and date printed on) upside down, hold the three pieces of raffia together then place them behind the square centrally and then tie a bow just as you would a shoe lace, this way once you turn the card up the right way the tails of the bow will be facing downwards, then trim the tails to the desired length



Step 4:
Attach the piece of card which now has your tied bow, onto the coloured layered card again using double sided tape and then attach both pieces of card to the white 145mm x 145mm card ensuring that the card is in the middle. Tip: Once you have the card lined up at the top left and right, when you press down it will be correct at the bottom.



Step 5:
Finally add the double sided sticky pad to your starfish embellishment remove the backing and then add this to the middle of the bow.


 

Free Swatches

Find out how our printing
service works